Extreme Networks XOS Commands
Skočit na navigaci
Skočit na vyhledávání
List of the handy commands for the XOS in the Extreme Networks SummitX switches family.
Basic commands
List version of the current XOS image
$ show version image
Displays detailed informations about ports including VLAN membership
$ show ports 48 info detail
Show all VLANs configured at port 2
$ show vlan ports 2
Manage VLANs
Create new VLAN
$ create vlan vlan_4_staff description text tag 4
Add port(s) to VLAN
$ configure vlan_4_staff add ports 25-25 tagged (or untagged)
Show MAC database
$ show fdb <VLANName> | include "String"
List of all vlans and associated ports
$ show configuration vlan
Kills system chosen system process
$ terminate process _processname_
Display the SNMP settings configured on the switch
$ show management
Access Lists Configuration
To edit access policy felk-kn run internal vi editor:
$ edit policy felk-kn
Sample policy code
entry one {
if {
source-address 147.32.80.0/21;
}
then {
permit;
}
}
entry two {
if {
source-address 10.32.0.0/16;
}
then {
permit;
}
}
entry three {
if {
source-address 2001:718:2:1600::/56;
}
then {
permit;
}
}
entry Telnet_Allow {
if match any {
source-address 192.168.1.0 /24;
source-address 192.168.2.0 /24;
} then {
permit;
}
}
Check written code against semantic errors:
$ check policy felk-kn
Assign it to the service, vlan, port:
$ conf ssh2 access-profile felk-kn
Reload policy
$ refresh policy felk-kn
Upgrade XOS image with ssh module
$ use image secondary $ download image <IPaddress> <ImageName>.xos vr "VR-Default" primary $ download image <IPaddress> <ModuleName>-ssh.xmod vr "VR-Default" primary
Confirm installation with "Yes", wait
$ use image <TargetPartition> $ reboot
LACP configuration
# configure sharing <MasterPort> add ports <SlavePorts> # configure sharing <MasterPort> lacp activity-mode active
Time, SNTP and timezone configuration
To configure proper timezone for CET and CEST
# configure timezone name CET 60 autodst name CEST begins every last sunday march at 2 0 ends every last sunday october at 3 0
SNTP client with primary and secondary server
# enable sntp-client # configure sntp-client primary <IPAddress> vr <VRName> # configure sntp-client secondary <IPAddress> vr <VRName>